14, 19 & 20. Crankshaft Oil Seals & O-Ring - TY250 Twinshock

Crank Seals & O-Ring

For all years & models of TY250 Twinshock

Double spring - 1 inside, 1 outside

The 2 springs are needed to form the seal

DON'T Fit single spring seals, waste of time, money and effort

Both these oil seals have castellations on the inside faces to help with bearing clearance so when fitting the green side should be seen from the outside of the crankcase.

^This is what you see from the outside^

Including the all important o-ring that everybody misses out and wonders why the bike doesn't run well!!!

Please note. 1974 TY250A uses a different o-ring from the later models. The 1974 model is identified by having the engine number prefix of 434-.

Be sure to select the correct model above.

Prices include VAT at the standard rate - VAT will be removed at basket/checkout for international & Channel Islands orders

Postage prices are charged by weight and this can be checked at any time by following the instructions below.

Add item(s) to your basket and then click the basket link that appears in the shopping basket box top right ↗↗.

This will take you to your shopping basket where you select you shipping country and the postal charge for your item(s) will be displayed.

Please remember that you are not committing yourself to buy the item(s) until you complete checkout. Even then, if you change your mind, no problem we’ll just delete it!

For details of how to pay us please click link below

HOW TO PAY US

Buyers outside the UK get 16.66% discount on published prices, excluding postage. This is removed once you enter the destination country at the checkout

You guys don't have to pay the vat!