.5 & 6. Float Valve & Gasket - TY125 & TY175
- OEM Yamaha Part, complete with gasket
-
£31.50
inc. VAT (where applicable)
Float Valve Ass'y
OEM Yamaha Part s
For all years & models of TY125 & TY175
Consists of
Float Valve & Seat
Gasket
Float Height on these models should be 21.0mm +/-2.5mm
If there is fuel coming out of the float bowl overflow then this is likely to be the culprit. Either caused by a piece of dirt lodged in the valve so it cannot close or wear in the assembly itself. To test if it is worn run your thumbnail up the cone of the needle and if you can feel a ridge then it needs replaced.
This is the complete assembly, valve, needle & gasket, they need to be replaced as one unit. Don't forget the gasket or your float height will be wrong.
This is the complete assembly, valve, needle & gasket, they need to be replaced as one unit. Don't forget the gasket or your float height will be wrong.
All prices include VAT at the current rate
Postage prices are charged by weight and this can be checked at any time by following the instructions below.
Add item(s) to your basket and then click the basket link that appears in the shopping basket box top right ↗↗.
This will take you to your shopping basket where you select you shipping country and the postal charge for your item(s) will be displayed.
Please remember that you are not committing yourself to buy the item(s) until you complete checkout. Even then, if you change your mind, no problem we’ll just delete it!
